matthewt

Wednesday, 17 April 2013 23:14

Sagem F@ST 2504 Firmware

As anyone who owns one of these routers knows, the default administration interface is very limited, many features that this router supports have been locked out by sky (telnet access, DNS settings, Quality of Service, IP Filtering etc.). The default sky firmware actually has a secondary Sagem web interface with access to all these settings, but it is turned off by default (and it cannot be changed from the sky web interface).

This custom firmware updates the configuration area of the router to allow access to this advanced web interface.

Warnings: Read these carefully!

  • If your router gets unplugged / there is a power cut during the upgrade process your router may become inoperable. However unlikely this may seem, it is a very real possibility and this procedure should only be attempted if you have a backup router.
  • All your router settings will be lost during the upgrade process, INCLUDING the factory default settings (wireless SSID, wireless key and MAC address). If somthing has happened to the sticker on the base of your router detailing this information DO NOT flash this firmware. Without these details you will not be able to connect to the internet.
  • It is highly recommended that you connect to your router directly via ethernet cable and NOT through wireless while updating.
  • It is highly recommended that your disconnect your router from the phone line while updating.
  • All though I have tested this firmware extensively, there is a chance that something may go wrong. I will not be held responsible for any harm that comes to your router due to use of this firmware.
  • Sky automatic updates have not been disabled by default, if they release a firmware or configuration update in the future it will overwrite this firmware and disable the extra features.

Change Log

Version 1.1
Fixed: Invalid header error when using Sky Router Tool

Advantages

  • The full sagem web interface is enabled by default, giving access to a large amount of previously unavailable settings.
  • This is a only very slightly modified sky firmware, it should not be detectable by sky that you are running a different firmware.
  • This firmware will work with the upcoming version of Sky Router Tool.
  • This firmware can be used to easily return a router which has had Sagem F@ST 2404 firmware flashed to it to Sky firmware.

How to install it

  • Before continuing make sure you read, and understand all of the warnings above
  • Download the new firmware from Sky_V2.8_Modified_V1.1_mrmt32.w
  • Log into the sky web interface and select "Router Upgrade"
  • Browse for the firmware file then click "Upload". Make sure you do not unplug your router after starting the upgrade process, doing so could permanently break it.
  • Wait about 2 minutes before trying the next step.
  • After 2 minuites visit http://192.168.0.1 (if you previously had changed your router's ip address it will now have reverted to the default).
  • If all went well you should be greeted by the following screen:

  • Type in the details it asks for, making sure they exactly match those on the bottom of your router
  • After clicking save you should get the following screen and your router will reboot:

Sagem Web Admin Access

The Sagem web admin can be accessed either from the link on the front page of the sky interface, or by visiting http://192.168.0.1/main.html.

Disabling Sky Auto Update

The sky automatic firmware update can be disabled by visiting http://192.168.0.1/skyinfo.html, clearing the fields marked "FVC file URL 1", "FVC file URL 2" and "Default HTTP POST URL" and clicking save. Note that doing this may allow sky to know that you are using custom firmware (as your router will no longer access their servers checking for updates).

Re-Enabling Sky Auto Update

Follow the disabling procedure but fill in the following settings:
FVC file URL 1: http://fast2504.skyfirmware.com
FVC file URL 2: http://fast2504.skyfirmware.com
Default HTTP POST URL: http://fast2504.skyfirmware.com/status/

Sagem Technical Info

I have written a page detailing the router's technical details and how to make your own firmwares for this router at:http://code.google.com/p/sky-router-.../SagemFAST2504

Please click here for the original forum thread.

Wednesday, 17 April 2013 23:13

Sky Router Tool Classic

Sky Router Tool Classic Screenshot

This is the original, now unsupported version of Sky Router Tool. It only supports the DG834GT but has a Windows Forms interface instead of the new web interface.

You can download it from here.

Thursday, 25 April 2013 20:58

Privacy Policy

This software is for personal use only. A license is required to use this software for commercial purposes.

END-USER LICENSE AGREEMENT FOR ExPVR IMPORTANT PLEASE READ THE TERMS AND CONDITIONS OF THIS LICENSE AGREEMENT CAREFULLY BEFORE CONTINUING WITH THIS PROGRAM INSTALL: pH-Mb's End-User License Agreement ("EULA") is a legal agreement between you (either an individual or a single entity) and pH-Mb for the pH-Mb software product(s) identified above which may include associated software components, media, printed materials, and "online" or electronic documentation ("SOFTWARE PRODUCT"). By installing, copying, or otherwise using the SOFTWARE PRODUCT, you agree to be bound by the terms of this EULA. This license agreement represents the entire agreement concerning the program between you and pH-Mb, (referred to as "licenser"), and it supersedes any prior proposal, representation, or understanding between the parties. If you do not agree to the terms of this EULA, do not install or use the SOFTWARE PRODUCT.

The SOFTWARE PRODUCT is protected by copyright laws and international copyright treaties, as well as other intellectual property laws and treaties. The SOFTWARE PRODUCT is licensed, not sold.

1. GRANT OF LICENSE.

The SOFTWARE PRODUCT is licensed as follows:
(a) Installation and Use.
pH-Mb grants you the right to install and use copies of the SOFTWARE PRODUCT on your computer solely for your internal, non-commercial, operations.
(b) Backup Copies.
You may also make copies of the SOFTWARE PRODUCT as may be necessary for backup and archival purposes.

2. DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS.

(a) Maintenance of Copyright Notices.
You must not remove or alter any copyright notices on any and all copies of the SOFTWARE PRODUCT.
(b) Distribution.
You may not distribute registered copies of the SOFTWARE PRODUCT to third parties. Evaluation versions available for download from pH-Mb's websites may be freely distributed.
(c) Prohibition on Reverse Engineering, Decompilation, and Disassembly.
You may not reverse engineer, decompile, or disassemble the SOFTWARE PRODUCT, except and only to the extent that such activity is expressly permitted by applicable law notwithstanding this limitation.
(d) Rental.
You may not rent, lease, or lend the SOFTWARE PRODUCT.
(e) Support Services.
pH-Mb may provide you with support services related to the SOFTWARE PRODUCT ("Support Services"). Any supplemental software code provided to you as part of the Support Services shall be considered part of the SOFTWARE PRODUCT and subject to the terms and conditions of this EULA.
(f) Compliance with Applicable Laws.
You must comply with all applicable laws regarding use of the SOFTWARE PRODUCT.

3. TERMINATION

Without prejudice to any other rights, pH-Mb may terminate this EULA if you fail to comply with the terms and conditions of this EULA. In such event, you must destroy all copies of the SOFTWARE PRODUCT in your possession.

4. COPYRIGHT

All title, including but not limited to copyrights, in and to the SOFTWARE PRODUCT and any copies thereof are owned by pH-Mb or its suppliers. All title and intellectual property rights in and to the content which may be accessed through use of the SOFTWARE PRODUCT is the property of the respective content owner and may be protected by applicable copyright or other intellectual property laws and treaties. This EULA grants you no rights to use such content. All rights not expressly granted are reserved by pH-Mb.

5. NO WARRANTIES

pH-Mb expressly disclaims any warranty for the SOFTWARE PRODUCT. The SOFTWARE PRODUCT is provided 'As Is' without any express or implied warranty of any kind, including but not limited to any warranties of merchantability, noninfringement, or fitness of a particular purpose. pH-Mb does not warrant or assume responsibility for the accuracy or completeness of any information, text, graphics, links or other items contained within the SOFTWARE PRODUCT. pH-Mb makes no warranties respecting any harm that may be caused by the transmission of a computer virus, worm, time bomb, logic bomb, or other such computer program. pH-Mb further expressly disclaims any warranty or representation to Authorized Users or to any third party.

6. LIMITATION OF LIABILITY

In no event shall pH-Mb be liable for any damages (including, without limitation, lost profits, business interruption, or lost information) rising out of 'Authorized Users' use of or inability to use the SOFTWARE PRODUCT, even if pH-Mb has been advised of the possibility of such damages. In no event will pH-Mb be liable for loss of data or for indirect, special, incidental, consequential (including lost profit), or other damages based in contract, tort or otherwise. pH-Mb shall have no liability with respect to the content of the SOFTWARE PRODUCT or any part thereof, including but not limited to errors or omissions contained therein, libel, infringements of rights of publicity, privacy, trademark rights, business interruption, personal injury, loss of privacy, moral rights or the disclosure of confidential information.

7. COMMERCIAL USE

This software is for personal (not-for-profit) use only. ‘For-profit-use’ includes, but is not limited to, the use of the SOFTWARE PRODUCT for ‘value-added’ services to customers, even when no direct charge is made. A commercial license is available upon request.

8. INCLUDED LIBRARIES

A copy of the 'Bouncy Castle' library is included with this software. It's license is as follows:

    Copyright (c) 2000 - 2011 The Legion Of The Bouncy Castle (http://www.bouncycastle.org)
    
    Permission is hereby granted, free of charge, to any person obtaining a copy of this software and 
    associated documentation files (the "Software"), to deal in the Software without restriction, 
    including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, 
    and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, 
    subject to the following conditions:
    
    The above copyright notice and this permission notice shall be included in all copies or substantial 
    portions of the Software.
    
    THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT 
    LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN
    NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 
    WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE 
    SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Wednesday, 24 April 2013 22:48

Home

Welcome to pH-Mb

Home of ExPVR; the Sky+ and Sky+ HD recording copier

Wednesday, 17 April 2013 23:16

Broadcom Firmware Tool

Please click here for more details.

Friday, 12 April 2013 23:20

ExPVR Terms and Conditions

This software is for personal use only. A license is required to use this software for commercial purposes.

END-USER LICENSE AGREEMENT FOR ExPVR IMPORTANT PLEASE READ THE TERMS AND CONDITIONS OF THIS LICENSE AGREEMENT CAREFULLY BEFORE CONTINUING WITH THIS PROGRAM INSTALL: pH-Mb's End-User License Agreement ("EULA") is a legal agreement between you (either an individual or a single entity) and pH-Mb for the pH-Mb software product(s) identified above which may include associated software components, media, printed materials, and "online" or electronic documentation ("SOFTWARE PRODUCT"). By installing, copying, or otherwise using the SOFTWARE PRODUCT, you agree to be bound by the terms of this EULA. This license agreement represents the entire agreement concerning the program between you and pH-Mb, (referred to as "licenser"), and it supersedes any prior proposal, representation, or understanding between the parties. If you do not agree to the terms of this EULA, do not install or use the SOFTWARE PRODUCT.

The SOFTWARE PRODUCT is protected by copyright laws and international copyright treaties, as well as other intellectual property laws and treaties. The SOFTWARE PRODUCT is licensed, not sold.

1. GRANT OF LICENSE.

The SOFTWARE PRODUCT is licensed as follows:
(a) Installation and Use.
pH-Mb grants you the right to install and use copies of the SOFTWARE PRODUCT on your computer solely for your internal, non-commercial, operations.
(b) Backup Copies.
You may also make copies of the SOFTWARE PRODUCT as may be necessary for backup and archival purposes.

2. DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS.

(a) Maintenance of Copyright Notices.
You must not remove or alter any copyright notices on any and all copies of the SOFTWARE PRODUCT.
(b) Distribution.
You may not distribute registered copies of the SOFTWARE PRODUCT to third parties. Evaluation versions available for download from pH-Mb's websites may be freely distributed.
(c) Prohibition on Reverse Engineering, Decompilation, and Disassembly.
You may not reverse engineer, decompile, or disassemble the SOFTWARE PRODUCT, except and only to the extent that such activity is expressly permitted by applicable law notwithstanding this limitation.
(d) Rental.
You may not rent, lease, or lend the SOFTWARE PRODUCT.
(e) Support Services.
pH-Mb may provide you with support services related to the SOFTWARE PRODUCT ("Support Services"). Any supplemental software code provided to you as part of the Support Services shall be considered part of the SOFTWARE PRODUCT and subject to the terms and conditions of this EULA.
(f) Compliance with Applicable Laws.
You must comply with all applicable laws regarding use of the SOFTWARE PRODUCT.

3. TERMINATION

Without prejudice to any other rights, pH-Mb may terminate this EULA if you fail to comply with the terms and conditions of this EULA. In such event, you must destroy all copies of the SOFTWARE PRODUCT in your possession.

4. COPYRIGHT

All title, including but not limited to copyrights, in and to the SOFTWARE PRODUCT and any copies thereof are owned by pH-Mb or its suppliers. All title and intellectual property rights in and to the content which may be accessed through use of the SOFTWARE PRODUCT is the property of the respective content owner and may be protected by applicable copyright or other intellectual property laws and treaties. This EULA grants you no rights to use such content. All rights not expressly granted are reserved by pH-Mb.

5. NO WARRANTIES

pH-Mb expressly disclaims any warranty for the SOFTWARE PRODUCT. The SOFTWARE PRODUCT is provided 'As Is' without any express or implied warranty of any kind, including but not limited to any warranties of merchantability, noninfringement, or fitness of a particular purpose. pH-Mb does not warrant or assume responsibility for the accuracy or completeness of any information, text, graphics, links or other items contained within the SOFTWARE PRODUCT. pH-Mb makes no warranties respecting any harm that may be caused by the transmission of a computer virus, worm, time bomb, logic bomb, or other such computer program. pH-Mb further expressly disclaims any warranty or representation to Authorized Users or to any third party.

6. LIMITATION OF LIABILITY

In no event shall pH-Mb be liable for any damages (including, without limitation, lost profits, business interruption, or lost information) rising out of 'Authorized Users' use of or inability to use the SOFTWARE PRODUCT, even if pH-Mb has been advised of the possibility of such damages. In no event will pH-Mb be liable for loss of data or for indirect, special, incidental, consequential (including lost profit), or other damages based in contract, tort or otherwise. pH-Mb shall have no liability with respect to the content of the SOFTWARE PRODUCT or any part thereof, including but not limited to errors or omissions contained therein, libel, infringements of rights of publicity, privacy, trademark rights, business interruption, personal injury, loss of privacy, moral rights or the disclosure of confidential information.

7. COMMERCIAL USE

This software is for personal (not-for-profit) use only. ‘For-profit-use’ includes, but is not limited to, the use of the SOFTWARE PRODUCT for ‘value-added’ services to customers, even when no direct charge is made. A commercial license is available upon request.

8. INCLUDED LIBRARIES

A copy of the 'Bouncy Castle' library is included with this software. It's license is as follows:

    Copyright (c) 2000 - 2011 The Legion Of The Bouncy Castle (http://www.bouncycastle.org)

    

    Permission is hereby granted, free of charge, to any person obtaining a copy of this software and 

    associated documentation files (the "Software"), to deal in the Software without restriction, 

    including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, 

    and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, 

    subject to the following conditions:

    

    The above copyright notice and this permission notice shall be included in all copies or substantial 

    portions of the Software.

    

    THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT 

    LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN

    NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 

    WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE 

    SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Saturday, 01 January 2011 10:01

Getting Started

It's easy to get started creating your website. Knowing some of the basics will help.

What is a Content Management System?

A content management system is software that allows you to create and manage webpages easily by separating the creation of your content from the mechanics required to present it on the web.

In this site, the content is stored in a database. The look and feel are created by a template. The Joomla! software brings together the template and the content to create web pages.

Site and Administrator

Your site actually has two separate sites. The site (also called the front end) is what visitors to your site will see. The administrator (also called the back end) is only used by people managing your site. You can access the administrator by clicking the "Site Administrator" link on the "User Menu" menu (visible once you login) or by adding /administrator to the end of your domain name.

Log in to the administrator using the username and password created during the installation of Joomla.

Logging in

To login to the front end of your site use the login form. Use the user name and password that were created as part of the installation process. Once logged-in you will be able to create and edit articles.

In managing your site, you will be able to create content that only logged-in users are able to see.

Creating an article

Once you are logged-in, a new menu will be visible. To create a new article, click on the "Submit Article" link on that menu.

The new article interface gives you a lot of options, but all you need to do is add a title and put something in the content area. To make it easy to find, set the state to published.

You can edit an existing article by clicking on the edit icon (this only displays to users who have the right to edit).

Template and modules

The look and feel of your site is controlled by a template. You can change the site name, background colour, highlights colour and more by editing the template options. In the administrator go to the Template Styles and click on My Default Template (Protostar). Most changes will be made on the Options tab.

The boxes around the main content of the site are called modules. You can change the image at the top of the page by editing the Image Module module in the Module Manager.

Learn more

There is much more to learn about how to use Joomla! to create the web site you envision. You can learn much more at the Joomla! documentation site and on the Joomla! forums.

Thursday, 27 June 2013 17:08

ExPVR V3.8.16 Released

ExPVR V3.8.16 is now available on our downloads page.

This update fixes the issues affecting recording grouping and on demand content with the new Sky+ planner version on DRX890/5 devices.

Users who have copies which have been affected by the older ExPVR versions (V3.8.14 and V3.8.15) can fix the grouping issues without needing to perform the copy again using the tool available on our forums.

Friday, 10 May 2013 16:38

ExPVR V3.8.13 Released

ExPVR has now been updated to V3.8.13. This version contains explicit support for the new R006.058.60.00P planner, which has just been rolled out to Sky DRX890 and DRX895 boxes. There are also a number of fixes for copies between legacy and darwin Sky Italia (MySky) boxes and experimental support for reading from Sky Deutschland hard disks.

This version will now write the newer databases (V2.51) for DRX890/895 devices. For this reason, please make sure that your device is up to date (has at least R006.058.60.00P) before attempting to copy to it if you have a DRX890 or DRX895. Instructions on how to force an update (if your box has not already done this automatically) are available here.

The new version can be downloaded from the ExPVR downloads page.

Thursday, 25 April 2013 00:20

Brand new website design

As you may have noticed, the ph-mb.com website has just been updated! It is now running on a customised version of the Joomla CMS which will allow future changes to be made far easier. You can now expect to see far more frequent updates to the content on ph-mb!

This new system has been extensively tested, but there is a small chance there could be some small bugs. If you do notice anything not working correctly, or just want to give some feedback on the new layout, please contact us at This email address is being protected from spambots. You need JavaScript enabled to view it. or make a post on our forums.

Page 4 of 5